Failure and treatment in bottle blowing process of bottle blowing machine
2017-11-07Announcementfont+font-
1. light box channel high temperature alarm.
Treatment: disassemble the waterway to connect the rubber tube, blow and clean the waterway with low pressure gas and alcohol.
2. gripper malfunction
Treatment: adjust the height of the slide, or the position of the claw.
3. action cards die.
Treatment: restart the machine.
4. no manual origin
The way to deal with it is to see the displacement of a jaw, shift the two jaw claw and the variable pitch location board, whether or not it is stuck to the corresponding position, if not, manually put them in the corresponding position, and then the origin.
5. movements are not in place
Treatment: see if anything is stuck. Adjust the gas flow valve.
6. exhaust sound is overrounded
Treatment: check whether the high-pressure exhaust muffler is broken or shedding.
7. embryo inferior embryo inhomogeneity
Treatment: adjust the position of the embryo bucket.
The above is the failure and treatment of the bottle blowing process of the bottle blowing machine.
