It is suitable for blowing the bottles within 15L, with high degree of automation and it’s widely used in non-recycle big-volume packaging products and edible oil industry etc. The capacity is up to 600BPH. The equipment is small, simple to operate with low maintenance cost.
Technical parameters of JCR-1CL bottle blowing machine
|
Form |
Project |
Technical parameters |
|
Product condition |
Maximum volume of products (L) |
Twelve |
|
Maximum diameter of product bottleneck (MM) |
280. |
|
|
Maximum size of product bottle (MM) |
65. |
|
|
Maximum height of product (MM) |
< 420 |
|
|
The maximum height of the tube (MM) |
<300 |
|
|
Bottle spacing (MM) |
Three hundred and twenty |
|
|
Design output (bottle / hour) |
500 (151) |
|
|
Mold cavity number |
One |
|
|
Heating part |
Heating unit |
Two |
|
Heating lamp layer number |
Sixteen |
|
|
Electrical parameters |
Voltage |
380v |
|
frequency |
50hz |
|
|
Use power |
25kw / h |
|
|
Installed power |
50kw |
|
|
Gas source
|
Low pressure compressed air pressure |
-- |
|
Air consumption of low pressure compressed air |
-- |
|
|
High pressure compressed air pressure |
3.5Mpa |
|
|
Air consumption of high pressure compressed air |
4m3/min |
|
|
Cooling water (water temperature below 18 DEG C) |
pressure |
8bar |
|
flow |
6m3/h |
|
|
Bottle blowing machine weight |
Main engine, heating machine, electric control box, etc. |
约5t |
|
Equipment dimensions |
Host (L x W x H) |
3800mm×2000mm×2300mm |
|
Embryo machine (L x W x H) |
2500mm×2500mm×2800mm |